GeForce FX6200 ROM for Cube without temp. sensor released

Maybe a few people will be excited about this. I’ve created a GeForce FX6200 ROM (XFX PVT44AWANG GeForce 6200 256MB 64-bit DDR) for Cube owners, which has reduced clock rates and a disabled temperature sensor.

For a long time now, only three different versions of the GeForce FX6200 ROM for the Mac have been available on the internet. At first, an original rom with stock clock rates and enabled temperature sensor, one with the same clock rates and a disabled temperature sensor and at last one with lowered clock rates (heat issue) and an enabled temperature sensor for cube owners.

The disabled temperature sensor however is required for Leopard users, because with an enabled sensor Leopards needs about 4 minutes to boot, as the sensor first needs to become hot enough for being discovered by the OS X driver.

So I created my own ROM, which has both – lowered clock rates and a disabled temperature sensor for Cube owners. You will need a PC to flash the card, information is available on the macelite wiki.

You can download the rom here.

Category: Digitale Welt, Macintosh 3 comments »

3 Responses to “GeForce FX6200 ROM for Cube without temp. sensor released”

  1. Voiceovers

    Hello are using WordPress for your blog platform?
    I’m new to the blog world but I’m trying to get
    started and set up my own. Do you require any coding knowledge to make your
    own blog? Any help would be greatly appreciated!

  2. dumpster rentals tampa

    Hi, every time i used to check blog posts here early in the morning, as i like to gain knowledge of more and more.

  3. 6200 wake issues on Cube – Whack-a-Mac

    […] A more elegant fix (in case there would be a software update to Leopard so you don’t need to manually remove the kernel extension) is to fix the firmware. […]


Leave a Reply



 

Back to top